Episode 60 - Your Own Designs, Link Drive Belt Hype!, Bed Construction, & MUCH More!

Support us on Patreon: https://www.patreon.com/woodshoplife   Guy 1) My question is: I am making a bed and I am contemplating the best way to attach the bed rails. I like the bed rail hangers/brackets because mortising and screwing them in should be simple. However, I want the bed to be tight and not squeak when the Mrs and I get busy. My other thought is to use bed bolts because I am thinking the bed will be much tighter, but lining up the bed bolt into the rail seems difficult because my bed rails will be 5/4 thick. Do any of you have experience making beds and what method of attaching the rails did you use. Mike 2) My 2nd ( serious) question relates to resawing, I can't resaw very straight even using a fence, I have watched plenty of YT videos and have seen different jigs from different manufacturers including the Magswitch fence that lets you pivot the workpiece. So...... to resaw should you be able to set up a fence and run the piece through getting a straight cut (as we would do with a TS) ? or is constant adjustment required ? Geoff Richards   Sean 1) Hey guys love the podcast,this is exactly what everyday woodworkers wanna listen to in a podcast. Question is I just started woodworking 6 months ago I turned my 2 car garage into a full fledge wood shop. Acquired all the big milling machines and just about everything you can think of. As of now I only follow detailed plans from others designs. I can follow plans to a T but actually making my own designs/plans seems somewhat daunting. I have sketchup and have been trying to learn. For whatever reason it’s not coming easy. Do you think because I can’t design my own pieces I should find another hobby. Or do these things take time to eventually learn. I’ve only been woodworking for 6 months I’ve mainly done case work a few cabinets and a built in for my wife’s closet. - Nathan 2) Hey guys!!! Listening to episode 58 right now and had a question: for a small shop, what finishes would you keep on hand, ready to go? Stain? Shellac? Poly? Also, what other finish supplies do you keep on hand as well?? Thanks! -Justin   Huy 1) Hey Guys, it’s Justin, with Liberty Craftsman. I really appreciate y’all answering my previous questions and now I’ve got some more for you. 1) when doing commission work, I tend to struggle with accurately picking a finish date, as the project inevitably gets delayed (generally on my end due to my full time job), so I have to talk with the customer and let them know what’s going on. I recently had a client ask for a refund, due to me delaying delivery by about 3 weeks. We had some personal family stuff happen that caused a significant delay in the project. So, long story short, do you think I should not give a date, but a range 8-10 weeks and wait until a certain point in the project to communicate a more accurate completion date? 2) Do y'all have any experience or thoughts on replacing a machine's V-belt with an adjustable link drive belt?  I've recently purchased a used 17" drill press that has more vibration than I'd prefer.  The pulleys appear to be aligned, so the next thing I would try is replacing the V-belts.  Are link belts worth it, or are they just a gimmick?