Episode 27 - Drying Lumber, Ash Holes, Differences In Glues, & MUCH More!

Support us on Patreon:https://www.patreon.com/woodshoplife Guys Questions: 1) I’ve always valued the information y’all share on the podcast and this one popped into my head. Sitting at work today as I was looking for the end of the internet I went down the rabbit hole of different wood glues. After going down the rabbit hole there was a lot of things that actually made sense for using different glues for different applications. I have always just used titebond 3 because it just seems like the most versatile of any other glue out there. It’s water resistant and food safe so why have 15 different glues for 1000 different applications. As I grow more and more into the trade it leads me to wanting to move more toward the more tried and true methods that some of the most reputable woodworkers have proved to be the best practices for certain applications. Leading into the question, (minus brands if you don’t want to go there) What types of glues do you migrate to the most and what is the reason for that? Is it a certain type of glue for a certain application or do you sort of do like me and stick with a particular glue for any project you make? Would you design a project and decide that you’re going to use a certain type of glue for it over another? Thank you for your time and please keep up the absolutely wonderful work y’all are doing on the podcast and your shops! The information y’all share is always spot on! Thanks,Brent JarvisClean Cut Woodworking 2) Re: your pick for the ETS125 - is that just a smaller Rotex 150 basically? Why not use RO150 to cover more area? I only have the RO150 and the triangle shaped one... DTS?? JJ Seans Questions: 1) I've got a large hole in a piece of ash. I'm not sure what to do with it. Other than. Fill with a black epoxy because the top will be stained pretty dark. I'm just worried it will be a really dark spot -Casey 2) Hi Guys, I am working on an entry table with through mortise and tenon joints with the tenon as a show feature. I am cutting the mortises using a drill press and cleaning up with chisels. I tried a sample piece and it does not look great. Is there a good technique to get a near perfect joint? Or will I be okay filling in the cracks with sawdust/glue filler trick? What do you recommend?Thanks for the advice. Keep up the great podcast!Thanks,James Huys Questions: 1) My son had a black walnut cut down last October. The arborist also had a portable mill so he milled up a number of slabs for me. I have kept these slabs in my garage since then. They are stickered and I put three ratchet straps around the pile to hopefully keep them flat. When is the right time to move them into the house? Is it ok to keep them in the garage? Have you guys harvested any lumber like this? I know Cremona has a process but I want to know what normal people do! JK! I love Cremona I've really enjoyed the format of the podcast. I listen to a number of them and I have to say this is on the top of the list. David 2) I’ve been commissioned to restore a round oak table with several leafs and 6 chairs....built in the early 1900’s! I’m excited for this project but restoration is still somewhat new to me. The table does have some water marks and other blushing on the finish, it I still don’t know what the finish is. I’d like to stay away from heavier solvents to avoid damaging the wood. Would going straight to an orbital sander or by hand with 120 be my best bet to get through safely? And if I wanted to try and remove a layer with a stripper of sorts, would I just guess between the mineral spirits or alcohols? Would love to hear your thoughts on this!Joey from Winter Wolf Woodworking   Our Social Picks: Huy: @plakotoris_studio Guy: @stenewoodwork Sean: @MrCabinetMaker