Episode 24 - Natural Finishes, Used Machinery, Dado Stacks, and MUCH More!

 Support us on Patreon: https://www.patreon.com/woodshoplife Guys Questions: 1) Hi guys love the show. I have a question about finishes. My generation (millennial) is into natural products. So I would like to have most and if not all my products that I have lined up ready to be finished to be natural. I've thought about shellac but for the projects that will be around alcohol, shellac is basically out of the picture. But I was wondering if I could put wax over it and that would help with the sealing or if I have to try something else? If I have to try something else what would you suggest that's a natural sealer? Some of my projects include a tabletop and beer caddy. Have you ever heard of the safe coat as a sealer? -Paige 2) Absolutely love the podcast guys, keeps my long drives to and from work educational and also tolerable. I know finishing has been covered a lot, but I can’t recall if the technique was ever covered. And also technique specific to the type of finish. I would love to spray everything, but as my shop is also my garage that isn’t always an option. What have you found easiest for applying different finishes? Natural bristle brushes, synthetic/polyester bristle brushes, foam brushes, plain old wiping on with an old t-shirt, spit shine, etc....I’ve also noticed I’m finding myself putting 2-3 coats on and then sanding back a coat instead of doing the light sanding with every single coat. Seems to work, but am I just wasting finish due to impatience? And Guy always talks about his famous BLO, poly, naphtha wipe-on varnish. I’d love to try that, how is it mixed and what is the amount of each product in the final mixture? Finishing never ends and I’d love to hear your thoughts.Joey from Winter Wolf Woodworking Seans Questions: 1) I'm in the market for my first Jointer. As usual, not a lot of money to spend. I am looking for a used Jointer and would like to know what I should be looking for, what I should avoid, and how to prioritize this list. The price range is up to $400. My project focus is furniture and jewelry box making. I have a small shop, under 200 sqft. Love your podcast and really appreciate all the information and tips you guys share. Thomas 2) I know this may be a bit of a loaded question as there are so many variables to consider but with the audience that is to be considered. I know what my particular practices are and they haven’t failed me yet. I believe it may be a good one for some of the “newer” woodworkers out there would really benefit from hearing it from some highly experienced makers as yourselves. Hi fellows... I would normally say guys but well... we all know theirs only one Guy here. I wanted to know about glueing up a panel from several boards. When gluing up a panel at what point would you consider using something such as a dowel or a domino to keep the boards aligned? Is there a certain thickness, length, or even width that you’d feel that there would be a need for adding this type of structural support to the glue-up. I know that they help out a ton with alignment but I’d like to know what your thoughts are on this subject. Thank you for your time and please keep up the absolutely wonderful work y’all are doing on the podcast and your shops! The information y’all share is always spot on! Thanks,Brent Jarvis Huys Questions: 1) I’m in the process of revamping and improving my shop, and the next step is dust collection. I have a 1.5 hp Shop Fox dust collector moving 1280 cfm of air. My problem is always with the friction loss in the flexible hoses. I plan to install 6” pvc on the wall and snub shorter flexible sections to some of the bigger tools. My question is regarding the split offs. Are the stop gates enough to single out air flow to certain machines? And what is the best way to reduce this down to a hose for handheld power tools? 2) I would like to purchase a new dado stack. I have an old Craftsman set that is steel - not carbide tipped. What do you guys use? Can you re